Aluminum Casting and Rolling Process Take out the pre-processed mouth fan, gasket, etc. from the holding furnace, check and correct them quickly. Put the nozzle……
The actual size of the ingot does not meet the required size, which is called size inconsistency. The reasons are as follows: Improper flow orifice……
In China, the casting parameters of the casting process are basically in the manual or automatic control system. The foreign countries automatically control the casting……
The mouth of the mixing furnace (furnace hole) is equipped with an aluminum liquid flow control device. In order to make the aluminum liquid flow……
Equipment inspection before aluminum ingot production Aluminum outlet: mainly check whether there is aluminum slag clogged, if there is, clear it. Outside line rangefinder: Infrared……
The transfer launder is the channel through which molten aluminum flows from the static furnace to the front box. In order to avoid the heat……
Cast non-ferrous metals include aluminum alloys, magnesium alloys, copper alloys, zinc alloys, titanium alloys, and bearing alloys. The equipment for smelting and refining non-ferrous metals……
The purification method in which the melt passes through a filter composed of neutral or active substances to separate the solid inclusions suspended in the……
The ceramic foam filter is a sheet filter, which is installed online between the metal processing system and the casting equipment. The ceramic foam filter……
The sedimentation operation often takes a long time, and the suspended solid particles in the liquid cannot be completely separated. The filtration is not only……
