Ceramic filter filtration efficiency main factors are filtration accuracy and filtration rate. Filtration accuracy refers to the size of the smallest solid particles in the……
Alumina ceramic foam is a low-temperature foam ceramic, which is mainly used for filtering non-ferrous metal melts such as aluminum and aluminum alloy. It is……
Foam ceramic filter use: The molten metal in the filter flows into the surface, and the sprue is designed as an open system. Effective use……
Filters for non-ferrous foundries are normally applied in the design of runner system in aluminum gravity casting. The purpose of using this filter is to……
The presence of gases and various inclusions in the melt causes the ingot to produce pores, non-metallic inclusions, oxide film and other defects, which affect……
Filters of molten aluminum are important for oxidized inclusions, there are two filters to remove the inclusions in molten aluminum. Filters of Molten Aluminum Deep……
In the molten aluminum filtration process, if the seal between the ceramic foam filter and the CFF filter box is not good, or there is……
Grain refinement process is widely used in semi-continuous casting. Because the grain refinement process is convenient to use a refined wire feeder, the adding direction……
When the aluminum liquid enters the inlet of the degassing device, in order to prevent the air from entering the hydrogen removal device from the……
Aluminum refining process includes two aspects: removing hydrogen inside the furnace and on-line degassing outside the furnace. For the AA5182 large-scale Al-Mg alloy ingots, the……
