After the molten aluminium filling for a certain period of time, it starts to enter the casting stage. At this stage, the casting speed starts……
After batching, smelting, refining and standing, the 6063 aluminum alloy liquid meets the required chemical composition, casting temperature, and metal purity, and completes the preparation……
The amount of strontium modified is 0.02%~0.06%, the upper limit is taken for sand casting, and the lower limit is taken for the metal type.……
In the process of refining and transportation of molten metal, foreign matter such as oxide scale, intermetallic compounds, and hearth fragments are easily brought into……
The ceramic foam filter capacity calculation should fully consider the filtration flow rate of each filter. If the flow rate is too small, the filter……
With the rapid development of the foundry industry, the requirements for the cleanliness of molten metal and the performance of castings are getting higher and……
Ceramic filters are mainly used for metal filtration in the foundry industry. Suitable for casting steel, cast iron, cast aluminum, alloy, non-ferrous metal castings and……
The role of ceramic foam filter in casting production, casting defects caused by non-metallic inclusions and other casting defects generally account for 50% to 60%……
The casting defects of the aluminum shell castings of the gasoline engine turbocharger compressors are analyzed. The possible causes of these defects are analyzed. After……
After the molten aluminum CFF (ceramic foam filter) filtration, in addition to the aluminum slag interface, the inclusions can also be adsorbed and removed by……
