Foam ceramic filter for Iranian aluminum is widely used in aluminum casting workshops such as aluminum alloy rods, slabs, aluminum foils, aluminum cans, and high aluminum profiles range. The 98-20 micron impurity particle filtration rate is 98.3%, which can help to achieve perfect aluminum products. Various specifications can be produced according to the customer’s requirements, the range of 20 PPI to 60 PPI can be selected, and the maximum size can be up to 26 inches.
Iranian aluminum ceramic foam filter reduces the inclusions on the casting cavity, greatly reduces the scrap rate, reduces production cost, and increases labor productivity.
The ceramic filter foundry allows the aluminum liquid to fill the cavity more evenly. Molten metal has a tendency to turbulence higher during casting. After the turbulent flow through the three-dimensional pore structure, it is finally converted into a very stable laminar flow, and the laminar flow fills the cavity.
In the first six months of the Iranian calendar this year (March 21-September 21), Iran’s four large aluminum producers, Iran Alumina Company, Al-Mahdi Aluminum Production Company, IRALCO, and SALCO, produced a total of 260,679 tons of aluminum ingots.
Earlier, the Iranian Mining and Mining Industry Development and Innovation Organization (IMIDRO) reported that in the first four months of this year (March 21 to July 22, 2021), Iran’s aluminum ingot production increased by 26.30% year-on-year.
The report also shows that in the first four months, the aluminum output of the four Iranian aluminum companies increased to 175,000 tons, while the same period last year was still 139,000 tons.
The IMIDRO report stated: “Iran Aluminum Corporation produced approximately 61,300 tons of aluminum ingots within 4 months, Al-Mahdi Aluminum Corporation produced 52,800 tons, Southern Aluminum Corporation produced 48,400 tons, and Iran Aluminum Corporation produced 12,700 tons.”
In addition, the Iranian alumina company produced 75,300 tons of alumina in the first four months, while the bauxite output during the same period was 338,000 tons, an increase of 41% over the same period last year. Compared with the same period of the previous year, Iran’s bauxite output is still 240,000 tons.
